1606-XLP30B Allen Bradley Compact Switched Mode Power Supply
The Allen Bradley 1606-XLP30B is a compact switched mode power supply designed to provide reliable, cost effective, and efficient power distribution in industrial and commercial applications. This product allows users to monitor the output current or voltage of their system and adjust it easily with its digital control panel. The 1606-XLP30B features a wide operating temperature range from -40°C to +50°C, making it suitable for harsh environments. It also has an adjustable input voltage, allowing it to be used with almost any AC power source. Additionally, this product offers low noise operation, low total harmonic distortion (THD), and more. In this article, we will discuss the features and benefits of the Allen Bradley 1606-XLP30B in greater detail.
What is the 1606-XLP30B Allen Bradley Compact Switched Mode Power Supply?
The 1606-XLP30B Allen Bradley Compact Switched Mode Power Supply is a 30W, single output power supply that provides regulated DC power for applications requiring up to 30W of continuous power. The unit’s small size and light weight makes it ideal for space-constrained applications. The 1606-XLP30B features an active PFC circuit that reduces AC line current harmonic distortion, resulting in reduced EMI/RFI emissions. The power supply also includes overvoltage, short circuit, and thermal protection circuitry to ensure safe operation.
How does the 1606-XLP30B work?
The 1606-XLP30B is a switched mode power supply that provides 30 watts of regulated power. It uses an input voltage of 100-240 VAC and has an output voltage of 24 VDC. The power supply has a built-in EMI filter and surge protection. It is also UL listed and CE marked.
What are the benefits of the 1606-XLP30B?
The 1606-XLP30B is a switched mode power supply that provides 30 watts of continuous power. It is designed for use in industrial and commercial applications. The 1606-XLP30B offers the following benefits:
• Efficient – The 1606-XLP30B is up to 89% efficient, which helps to save on energy costs.
• Compact – The compact design of the 1606-XLP30B saves space in your equipment cabinet.
• rugged – The 1606-XLP30B is designed for industrial and commercial applications, and can withstand harsh environments.
How to install the 1606-XLP30B?
If you’re looking to install the 1606-XLP30B, there are a few things you’ll need to keep in mind. First, make sure that you have the proper tools and equipment. You’ll need a Phillips head screwdriver, a flathead screwdriver, and a drill. Next, gather all of your materials. You’ll need the power supply, screws, washers, and wire nuts. Once you have everything you need, follow these steps:
1. Begin by unscrewing the top cover of the power supply. Be careful not to lose any of the screws!
2. With the top cover off, locate the three Phillips head screws that hold the internal PCB in place. Remove these screws and set them aside.
3. Carefully remove the PCB from the power supply casing. 4. Locate the green LED on the PCB. This is the positive input for the power supply. solder a short piece of wire to this point (about 6 inches long).
5. Solder another piece of wire (also about 6 inches long) to one of the ground points on the PCB (there should be two or three).
6. Drill a hole in the side of the power supply casing large enough to accommodate both wires (the green LED wire and ground wire).
7After drilling the hole, feed both wires through it so that they’re poking out from inside the casing.
8Replacethe PCB back
How to troubleshoot the 1606-XLP30B?
If you are having trouble with your 1606-XLP30B Allen Bradley Compact Switched Mode Power Supply, there are a few things you can do to troubleshoot the issue. First, check the power supply for any loose connections or damaged components. Next, check the output of the power supply with a multimeter to make sure it is within the specified range. Finally, if the power supply is still not working properly, contact a qualified technician for assistance.
Reviews
There are no reviews yet.